Insulated render · Surrey
Insulated render systems in Leatherhead
If you're planning insulated render in Leatherhead, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Two-tone schemes, such as a darker plinth or entrance surround, are an option on houses in Leatherhead.
- Free survey in KT22 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Leatherhead
Postcode, service and a phone number is all we need.
What the job covers
- Combines a new look with lower heat loss
- Suitable for houses, extensions and whole buildings
- One system: board, adhesive, fixings, mesh, primer and render
- Designed and tested by the system manufacturer
Local considerations in Leatherhead
We also cover Epsom and Esher, close to Leatherhead. It's roughly 10 miles from Leatherhead to Woking, the largest town in Surrey. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
We bring finish samples to Leatherhead surveys so colours can be judged in daylight against your roof and windows.
- Postcode district
- KT22
- County or area
- Surrey
- Nation
- England
- Nearby
- Epsom, Esher, Banstead, Surbiton
Planning and building control in England
Planning in Leatherhead follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Is insulated render the same as EWI?
Yes — insulated render is the everyday name for a rendered EWI system. Some people also use it for thin thermal renders containing aerogel or cork, which are applied 20–40mm thick on heritage walls. They insulate far less than board systems, so we treat them as a specialist option.
Insulated render systems prices in Leatherhead
| Item | Guide price | Notes |
|---|---|---|
| Insulated render (EPS + silicone) | £105–£145 per m²0% VAT | Excluding scaffold |
| Mineral wool insulated render | £125–£170 per m²0% VAT | |
| Contrasting colour features | +£8–£20 per m²0% VAT | Where used |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Insulated render in Leatherhead: questions
Does insulated render need painting?
Through-coloured silicone and acrylic renders don't need painting. Mineral renders are usually painted with a compatible masonry paint.
Can insulated render be applied in winter?
Only in suitable weather — typically above 5°C and rising, with no frost or rain during curing. Winter programmes allow for lost days.
Will my house look different?
Yes, if it was brick or pebble dash. If you want to keep a brick look, a brick-slip finish over the insulation is an option.
Do you cover Leatherhead?
Yes — we survey and quote insulated render in Leatherhead (KT22) and nearby Epsom, Esher and Banstead, with a fixed written price before any work starts.