Lime render · Ayrshire
Lime render in Kilmarnock
From Kilmarnock to Irvine, we price lime render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. For stone and early brick properties in Kilmarnock, lime render is often the right answer.
- Free survey in KA3 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Kilmarnock
Postcode, service and a phone number is all we need.
Part of every quote
- Helps walls dry out where cement render trapped moisture
- Slower curing — needs frost-free, protected conditions
- Works with wood fibre insulation as a breathable EWI system
- Vapour-open and flexible, suited to older solid walls
Local considerations in Kilmarnock
We also cover Irvine and Ayr, close to Kilmarnock. South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Ayrshire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Lime work in Kilmarnock is scheduled for frost-free months so the render cures properly.
- Postcode district
- KA3
- County or area
- Ayrshire
- Nation
- Scotland
- Nearby
- Irvine, Ayr, Newton Mearns, Paisley
Scotland: planning and regulations
For Kilmarnock properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Scotland's building standards cover changes to external wall construction; we check whether your job in Kilmarnock needs a warrant.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Kilmarnock
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Lime render in Kilmarnock: questions
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Do you cover Kilmarnock?
Yes — we survey and quote lime render in Kilmarnock (KA3) and nearby Irvine, Ayr and Newton Mearns, with a fixed written price before any work starts.