Lime render · Berkshire
Lime render in Slough
If you're planning lime render in Slough, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Lime work in Slough is scheduled for frost-free months so the render cures properly.
- Free survey in SL1 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Slough
Postcode, service and a phone number is all we need.
What's included
- Vapour-open and flexible, suited to older solid walls
- Traditional hand-finished texture
- Often appropriate in conservation settings
- Works with wood fibre insulation as a breathable EWI system
Local considerations in Slough
As well as Slough itself, we quote in Windsor, Maidenhead and Gerrards Cross. Slough is about 17 miles from Reading. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Berkshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For stone and early brick properties in Slough, lime render is often the right answer.
- Postcode district
- SL1
- County or area
- Berkshire
- Nation
- England
- Nearby
- Windsor, Maidenhead, Gerrards Cross, Uxbridge
England: planning and regulations
Planning in Slough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Why use lime instead of cement?
Cement render is hard and relatively impermeable. On older walls built with lime mortar, it can crack, let rain in at the cracks and then stop the wall drying, leading to damp patches inside and spalling stone or brick. Lime is softer, more flexible and vapour-open, so moisture can escape.
Lime render prices in Slough
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Lime render in Slough: questions
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Do you cover Slough?
Yes — we survey and quote lime render in Slough (SL1) and nearby Windsor, Maidenhead and Gerrards Cross, with a fixed written price before any work starts.