Lime render · Wales
Lime render in Dyfed
Quotes for lime render in Dyfed set out the system, detailing, access and VAT position in writing. Lime work in Dyfed is scheduled for frost-free months so the render cures properly.
- Free survey and fixed written price
- Guide price from £78 per m² + scaffold, inc VAT
- Planning and building control checked for Wales
Free survey in Dyfed
Tell us the postcode and what you need.
What you get
- Slower curing — needs frost-free, protected conditions
- Helps walls dry out where cement render trapped moisture
- Often appropriate in conservation settings
- Traditional hand-finished texture
- Vapour-open and flexible, suited to older solid walls
Local considerations in Dyfed
West Wales has a high share of older solid-walled and stone homes, many in exposed coastal or rural settings.
Parts of Dyfed fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
For stone and early brick properties in Dyfed, lime render is often the right answer.
- Nation
- Wales
- Region
- West Wales
- Towns covered
- Llanelli, Ammanford, Carmarthen, Aberystwyth, Milford Haven, Haverfordwest
- Guide price
- From £78 per m² + scaffold · inc VAT
Wales: planning and regulations
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. Your local planning authority has the final word.
The Building Regulations as they apply in Wales treat insulating or re-rendering more than half of a wall's area, or more than a quarter of the building's whole envelope, as renovating a thermal element, with Approved Document L (Wales) setting the target. Building control is involved before work starts.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Dyfed
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Lime render in Dyfed: questions
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Do you cover all of Dyfed?
Yes. We survey and quote lime render across Dyfed, including Llanelli, Ammanford, Carmarthen, Aberystwyth, Milford Haven.
Do I need planning permission in Wales?
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. We check your address before quoting.