Lime render · Lancashire
Lime render in Ormskirk
Need lime render in Ormskirk? Tell us about the property and we'll arrange a free survey and a written quote. For stone and early brick properties in Ormskirk, lime render is often the right answer.
- Free survey in L39 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Ormskirk
Postcode, service and a phone number is all we need.
What you get
- Helps walls dry out where cement render trapped moisture
- Works with wood fibre insulation as a breathable EWI system
- Often appropriate in conservation settings
- Slower curing — needs frost-free, protected conditions
Ormskirk: walls, weather and approvals
We also cover Maghull and Skelmersdale, close to Ormskirk. It's roughly 15 miles from Ormskirk to Preston, the largest town in Lancashire. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Lime work in Ormskirk is scheduled for frost-free months so the render cures properly.
- Postcode district
- L39
- County or area
- Lancashire
- Nation
- England
- Nearby
- Maghull, Skelmersdale, Kirkby, Southport
England: planning and regulations
Before quoting in Ormskirk, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Ormskirk
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Lime render in Ormskirk: questions
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Do you cover Ormskirk?
Yes — we survey and quote lime render in Ormskirk (L39) and nearby Maghull, Skelmersdale and Kirkby, with a fixed written price before any work starts.