Lime render · Leicestershire
Lime render in Market Harborough
If you're planning lime render in Market Harborough, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For stone and early brick properties in Market Harborough, lime render is often the right answer.
- Free survey in LE16 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Market Harborough
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open and flexible, suited to older solid walls
- Often appropriate in conservation settings
- Helps walls dry out where cement render trapped moisture
- Works with wood fibre insulation as a breathable EWI system
Market Harborough: walls, weather and approvals
We cover Market Harborough and nearby Corby, Kettering and Wigston. Market Harborough sits around 14 miles from Leicester. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Much of Leicestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Market Harborough, we look for cement patching that may be trapping moisture before suggesting lime.
- Postcode district
- LE16
- County or area
- Leicestershire
- Nation
- England
- Nearby
- Corby, Kettering, Wigston, Oadby
Planning and building control in England
Planning in Market Harborough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Market Harborough
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Lime render in Market Harborough: questions
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Do you cover Market Harborough?
Yes — we survey and quote lime render in Market Harborough (LE16) and nearby Corby, Kettering and Wigston, with a fixed written price before any work starts.