Lime render · Warwickshire
Lime render in Stratford-upon-Avon
If you're planning lime render in Stratford-upon-Avon, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For stone and early brick properties in Stratford-upon-Avon, lime render is often the right answer.
- Free survey in CV37 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Stratford-upon-Avon
Postcode, service and a phone number is all we need.
Included as standard
- Often appropriate in conservation settings
- Vapour-open and flexible, suited to older solid walls
- Slower curing — needs frost-free, protected conditions
- Works with wood fibre insulation as a breathable EWI system
What we look for in Stratford-upon-Avon
We also cover Warwick and Leamington Spa, close to Stratford-upon-Avon. It's roughly 10 miles from Stratford-upon-Avon to Leamington Spa, the largest town in Warwickshire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Warwickshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Stratford-upon-Avon, we look for cement patching that may be trapping moisture before suggesting lime.
- Postcode district
- CV37
- County or area
- Warwickshire
- Nation
- England
- Nearby
- Warwick, Leamington Spa, Kenilworth, Evesham
Planning and building control in England
Before quoting in Stratford-upon-Avon, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Why use lime instead of cement?
Cement render is hard and relatively impermeable. On older walls built with lime mortar, it can crack, let rain in at the cracks and then stop the wall drying, leading to damp patches inside and spalling stone or brick. Lime is softer, more flexible and vapour-open, so moisture can escape.
Lime render prices in Stratford-upon-Avon
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Lime render in Stratford-upon-Avon: questions
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Do you cover Stratford-upon-Avon?
Yes — we survey and quote lime render in Stratford-upon-Avon (CV37) and nearby Warwick, Leamington Spa and Kenilworth, with a fixed written price before any work starts.