Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · England

Mineral wool external wall insulation in Berkshire

Quotes for mineral wool external wall insulation in Berkshire set out the system, detailing, access and VAT position in writing. Older solid-walled homes in Berkshire can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey and fixed written price
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Planning and building control checked for England

Free survey in Berkshire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Used on blocks of flats and buildings with storeys above 11m
  • Heavier than EPS, so more fixings and careful handling
  • Finished in mineral or silicone render, or brick slip
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Better sound reduction than foam boards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Local considerations in Berkshire

Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Berkshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

On blocks and taller buildings in Berkshire, mineral wool is the default because of the fire guidance for external walls.

Nation
England
Region
South East
Towns covered
Reading, Slough, Bracknell, Maidenhead, Wokingham, Windsor, Newbury, Earley…
Guide price
From £125 per m² + scaffold · 0% VAT

Planning and building control in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

Combustible materials are banned in the external walls of relevant buildings 18 metres and over (regulation 7(2)), and Approved Document B guidance also covers residential buildings with a storey 11 metres or more above ground. Higher-risk buildings go through the Building Safety Regulator.

What about noise?

Dense mineral wool adds mass and absorbs sound, so homes beside main roads or railways often notice a quieter interior, particularly where windows are also upgraded. The improvement depends on the whole wall and windows, so we don't quote decibel figures without testing.

Mineral wool external wall insulation prices in Berkshire

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Berkshire: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover all of Berkshire?

Yes. We survey and quote mineral wool external wall insulation across Berkshire, including Reading, Slough, Bracknell, Maidenhead, Wokingham.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Mineral wool EWI in Berkshire

Send your postcode and we'll arrange a survey in Berkshire.

Call freeGet a quote