Mineral wool EWI · Cambridgeshire
Mineral wool external wall insulation in Peterborough
Looking for mineral wool external wall insulation in Peterborough? We survey homes across Peterborough and the PE1 area, then give you a fixed written price before any work starts. Older solid-walled homes in Peterborough can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey in PE1 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Peterborough
Postcode, service and a phone number is all we need.
What the job covers
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Finished in mineral or silicone render, or brick slip
- Better sound reduction than foam boards
- Vapour-open, so moisture in solid walls can dry outwards
What we look for in Peterborough
As well as Peterborough itself, we quote in Stamford, March and Spalding. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Cambridgeshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For homes in Peterborough near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Postcode district
- PE1
- County or area
- Cambridgeshire
- Nation
- England
- Nearby
- Stamford, March, Spalding, Huntingdon
Planning and building control in England
For a house in Peterborough, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Is mineral wool required on my building?
For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.
Mineral wool external wall insulation prices in Peterborough
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Mineral wool EWI in Peterborough: questions
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Do you cover Peterborough?
Yes — we survey and quote mineral wool external wall insulation in Peterborough (PE1) and nearby Stamford, March and Spalding, with a fixed written price before any work starts.