Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Cornwall

Mineral wool external wall insulation in Newquay

Homeowners and landlords in Newquay can get a free survey and a fixed written quote for mineral wool external wall insulation, covering TR7 and the surrounding area. Older solid-walled homes in Newquay can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in TR7 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Newquay

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Used on blocks of flats and buildings with storeys above 11m
  • Finished in mineral or silicone render, or brick slip
  • Heavier than EPS, so more fixings and careful handling
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Before we quote in Newquay

We cover Newquay and nearby Truro, St Austell and Redruth. Newquay sits around 14 miles from Redruth. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Cornwall fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

For homes in Newquay near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
TR7
County or area
Cornwall
Nation
England
Nearby
Truro, St Austell, Redruth, Bodmin

Planning and building control in England

For a house in Newquay, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Newquay

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Newquay: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Newquay?

Yes — we survey and quote mineral wool external wall insulation in Newquay (TR7) and nearby Truro, St Austell and Redruth, with a fixed written price before any work starts.

Mineral wool EWI in Newquay

Send your postcode and we'll arrange a survey in Newquay.

Call freeGet a quote