Mineral wool EWI · Greater London
Mineral wool external wall insulation in Coulsdon
Looking for mineral wool external wall insulation in Coulsdon? We survey homes across Coulsdon and the CR5 area, then give you a fixed written price before any work starts. For homes in Coulsdon near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Free survey in CR5 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Coulsdon
Postcode, service and a phone number is all we need.
What the job covers
- Vapour-open, so moisture in solid walls can dry outwards
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Used on blocks of flats and buildings with storeys above 11m
- Finished in mineral or silicone render, or brick slip
What we look for in Coulsdon
We cover Coulsdon and nearby Purley, Banstead and Wallington. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Older solid-walled homes in Coulsdon can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Postcode district
- CR5
- County or area
- Greater London
- Nation
- England
- Nearby
- Purley, Banstead, Wallington, Sutton
Approvals in England
Planning in Coulsdon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Coulsdon
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Mineral wool EWI in Coulsdon: questions
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Do you cover Coulsdon?
Yes — we survey and quote mineral wool external wall insulation in Coulsdon (CR5) and nearby Purley, Banstead and Wallington, with a fixed written price before any work starts.