Mineral wool EWI · Greater London
Mineral wool external wall insulation in Highbury
From Highbury to Islington, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On blocks and taller buildings in Highbury, mineral wool is the default because of the fire guidance for external walls.
- Free survey in N5 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Highbury
Postcode, service and a phone number is all we need.
Included as standard
- Better sound reduction than foam boards
- Used on blocks of flats and buildings with storeys above 11m
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Vapour-open, so moisture in solid walls can dry outwards
Homes and walls in Highbury
We cover Highbury and nearby Islington, Holloway and Stamford Hill. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Older solid-walled homes in Highbury can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Postcode district
- N5
- County or area
- Greater London
- Nation
- England
- Nearby
- Islington, Holloway, Stamford Hill, Archway
Planning and building control in England
Planning in Highbury follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Highbury
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Highbury: questions
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Do you cover Highbury?
Yes — we survey and quote mineral wool external wall insulation in Highbury (N5) and nearby Islington, Holloway and Stamford Hill, with a fixed written price before any work starts.