Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Greater Manchester

Mineral wool external wall insulation in Bury

Looking for mineral wool external wall insulation in Bury? We survey homes across Bury and the BL9 area, then give you a fixed written price before any work starts. On blocks and taller buildings in Bury, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in BL9 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Bury

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Heavier than EPS, so more fixings and careful handling
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Finished in mineral or silicone render, or brick slip
  • Better sound reduction than foam boards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Homes and walls in Bury

As well as Bury itself, we quote in Radcliffe, Heywood and Whitefield. It's roughly 9 miles from Bury to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Older solid-walled homes in Bury can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

Postcode district
BL9
County or area
Greater Manchester
Nation
England
Nearby
Radcliffe, Heywood, Whitefield, Prestwich

Permissions in England

Planning in Bury follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Bury

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Bury: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Bury?

Yes — we survey and quote mineral wool external wall insulation in Bury (BL9) and nearby Radcliffe, Heywood and Whitefield, with a fixed written price before any work starts.

Mineral wool EWI in Bury

Start with a guide price, then fix it with a free survey in Bury.

Call freeGet a quote