Mineral wool EWI · Greater Manchester
Mineral wool external wall insulation in Failsworth
If you're planning mineral wool external wall insulation in Failsworth, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Older solid-walled homes in Failsworth can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey in M35 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Failsworth
Postcode, service and a phone number is all we need.
Included as standard
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Used on blocks of flats and buildings with storeys above 11m
- Finished in mineral or silicone render, or brick slip
- Better sound reduction than foam boards
Before we quote in Failsworth
We cover Failsworth and nearby Droylsden, Ashton-under-Lyne and Oldham. It's roughly 3 miles from Failsworth to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For homes in Failsworth near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Postcode district
- M35
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Droylsden, Ashton-under-Lyne, Oldham, Manchester
Permissions in England
For a house in Failsworth, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Failsworth
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Failsworth: questions
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Do you cover Failsworth?
Yes — we survey and quote mineral wool external wall insulation in Failsworth (M35) and nearby Droylsden, Ashton-under-Lyne and Oldham, with a fixed written price before any work starts.