Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Hampshire

Mineral wool external wall insulation in Andover

We quote mineral wool external wall insulation for homes in Andover (SP10) and nearby Winchester and Newbury, with guide prices online and a free survey to fix the price. On blocks and taller buildings in Andover, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in SP10 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Andover

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Finished in mineral or silicone render, or brick slip
  • Vapour-open, so moisture in solid walls can dry outwards
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Heavier than EPS, so more fixings and careful handling
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Andover: walls, weather and approvals

As well as Andover itself, we quote in Winchester, Newbury and Salisbury. Andover sits around 22 miles from Southampton. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For homes in Andover near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
SP10
County or area
Hampshire
Nation
England
Nearby
Winchester, Newbury, Salisbury, Thatcham

Approvals in England

For a house in Andover, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Is mineral wool required on my building?

For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.

Mineral wool external wall insulation prices in Andover

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Andover: questions

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Do you cover Andover?

Yes — we survey and quote mineral wool external wall insulation in Andover (SP10) and nearby Winchester, Newbury and Salisbury, with a fixed written price before any work starts.

Mineral wool EWI in Andover

Book a free survey in Andover — no obligation.

Call freeGet a quote