Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Hampshire

Mineral wool external wall insulation in Fleet

Quotes for mineral wool external wall insulation in Fleet list the system, the detailing and the VAT position in writing, so you know exactly what's included. On blocks and taller buildings in Fleet, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in GU51 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Fleet

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Vapour-open, so moisture in solid walls can dry outwards
  • Better sound reduction than foam boards
  • Finished in mineral or silicone render, or brick slip
  • Used on blocks of flats and buildings with storeys above 11m
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

What we look for in Fleet

We also cover Farnborough and Aldershot, close to Fleet. It's roughly 36 miles from Fleet to Southampton, the largest town in Hampshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For homes in Fleet near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
GU51
County or area
Hampshire
Nation
England
Nearby
Farnborough, Aldershot, Yateley, Sandhurst

England: planning and regulations

Planning in Fleet follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Fleet

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Fleet: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Fleet?

Yes — we survey and quote mineral wool external wall insulation in Fleet (GU51) and nearby Farnborough, Aldershot and Yateley, with a fixed written price before any work starts.

Mineral wool EWI in Fleet

Send your postcode and we'll arrange a survey in Fleet.

Call freeGet a quote