Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Norfolk

Mineral wool external wall insulation in Norwich

Quotes for mineral wool external wall insulation in Norwich list the system, the detailing and the VAT position in writing, so you know exactly what's included. On blocks and taller buildings in Norwich, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in NR2 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Norwich

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Better sound reduction than foam boards
  • Finished in mineral or silicone render, or brick slip
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Used on blocks of flats and buildings with storeys above 11m
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

What we look for in Norwich

We also cover Dereham and Great Yarmouth, close to Norwich. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.

Much of Norfolk sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For homes in Norwich near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
NR2
County or area
Norfolk
Nation
England
Nearby
Dereham, Great Yarmouth, Lowestoft, Thetford

England: planning and regulations

Planning in Norwich follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Norwich

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Norwich: questions

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Do you cover Norwich?

Yes — we survey and quote mineral wool external wall insulation in Norwich (NR2) and nearby Dereham, Great Yarmouth and Lowestoft, with a fixed written price before any work starts.

Mineral wool EWI in Norwich

Send your postcode and we'll arrange a survey in Norwich.

Call freeGet a quote