Mineral wool EWI · Northamptonshire
Mineral wool external wall insulation in Wellingborough
We quote mineral wool external wall insulation for homes in Wellingborough (NN8) and nearby Rushden and Kettering, with guide prices online and a free survey to fix the price. Older solid-walled homes in Wellingborough can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey in NN8 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Wellingborough
Postcode, service and a phone number is all we need.
What you get
- Vapour-open, so moisture in solid walls can dry outwards
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Better sound reduction than foam boards
- Used on blocks of flats and buildings with storeys above 11m
Before we quote in Wellingborough
Surveys in Wellingborough also cover the surrounding NN8 district and towns such as Rushden and Kettering. Wellingborough is about 9 miles from Northampton. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Much of Northamptonshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On blocks and taller buildings in Wellingborough, mineral wool is the default because of the fire guidance for external walls.
- Postcode district
- NN8
- County or area
- Northamptonshire
- Nation
- England
- Nearby
- Rushden, Kettering, Northampton, Corby
Permissions in England
Planning in Wellingborough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Wellingborough
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Wellingborough: questions
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Do you cover Wellingborough?
Yes — we survey and quote mineral wool external wall insulation in Wellingborough (NN8) and nearby Rushden, Kettering and Northampton, with a fixed written price before any work starts.