Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Perth and Kinross

Mineral wool external wall insulation in Perth

Mineral wool external wall insulation in Perth: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Older solid-walled homes in Perth can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in PH1 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Perth

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Heavier than EPS, so more fixings and careful handling
  • Better sound reduction than foam boards
  • Vapour-open, so moisture in solid walls can dry outwards
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

What we look for in Perth

As well as Perth itself, we quote in Blairgowrie, Crieff and Glenrothes. Tayside has stone tenements and terraces in the towns, harled cottages and post-war estates.

Exposure to wind-driven rain varies across Perth and Kinross: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

On blocks and taller buildings in Perth, mineral wool is the default because of the fire guidance for external walls.

Postcode district
PH1
County or area
Perth and Kinross
Nation
Scotland
Nearby
Blairgowrie, Crieff, Glenrothes, Dundee

Approvals in Scotland

In Scotland, permitted development for external wall changes is narrower, so in Perth we check with the council's planning team where the appearance changes, and always for flats, tenements and conservation areas.

Where a building warrant is needed for Perth work, it's obtained before installation starts, and the quote says who arranges it.

Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground, so taller buildings get non-combustible systems.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Perth

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Perth: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Perth?

Yes — we survey and quote mineral wool external wall insulation in Perth (PH1) and nearby Blairgowrie, Crieff and Glenrothes, with a fixed written price before any work starts.

Mineral wool EWI in Perth

Get a free survey and fixed written price for mineral wool external wall insulation in Perth.

Call freeGet a quote