Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Shropshire

Mineral wool external wall insulation in Shrewsbury

If you're planning mineral wool external wall insulation in Shrewsbury, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Older solid-walled homes in Shrewsbury can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in SY1 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Shrewsbury

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Used on blocks of flats and buildings with storeys above 11m
  • Heavier than EPS, so more fixings and careful handling
  • Better sound reduction than foam boards
  • Vapour-open, so moisture in solid walls can dry outwards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Shrewsbury: walls, weather and approvals

We cover Shrewsbury and nearby Wellington, Telford and Oswestry. Shrewsbury sits around 13 miles from Telford. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.

Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For homes in Shrewsbury near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
SY1
County or area
Shropshire
Nation
England
Nearby
Wellington, Telford, Oswestry, Ludlow

Planning and building control in England

Before quoting in Shrewsbury, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Shrewsbury

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Shrewsbury: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Shrewsbury?

Yes — we survey and quote mineral wool external wall insulation in Shrewsbury (SY1) and nearby Wellington, Telford and Oswestry, with a fixed written price before any work starts.

Mineral wool EWI in Shrewsbury

Start with a guide price, then fix it with a free survey in Shrewsbury.

Call freeGet a quote