Mineral wool EWI · England
Mineral wool external wall insulation in Somerset
We provide mineral wool external wall insulation across Somerset, including Bath, Weston-super-Mare and Taunton, with a free survey and fixed written price. Older solid-walled homes in Somerset can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey and fixed written price
- Guide price from £125 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Somerset
Tell us the postcode and what you need.
What's included
- Vapour-open, so moisture in solid walls can dry outwards
- Finished in mineral or silicone render, or brick slip
- Better sound reduction than foam boards
- Used on blocks of flats and buildings with storeys above 11m
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Homes and walls in Somerset
The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For homes in Somerset near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Nation
- England
- Region
- South West
- Towns covered
- Bath, Weston-super-Mare, Taunton, Yeovil, Bridgwater, Frome, Portishead, Burnham-on-Sea…
- Guide price
- From £125 per m² + scaffold · 0% VAT
Permissions in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
Combustible materials are banned in the external walls of relevant buildings 18 metres and over (regulation 7(2)), and Approved Document B guidance also covers residential buildings with a storey 11 metres or more above ground. Higher-risk buildings go through the Building Safety Regulator.
Is mineral wool required on my building?
For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.
Mineral wool external wall insulation prices in Somerset
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Somerset: questions
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Do you cover all of Somerset?
Yes. We survey and quote mineral wool external wall insulation across Somerset, including Bath, Weston-super-Mare, Taunton, Yeovil, Bridgwater.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.