Mineral wool EWI · West Glamorgan
Mineral wool external wall insulation in Briton Ferry
From Briton Ferry to Neath, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On blocks and taller buildings in Briton Ferry, mineral wool is the default because of the fire guidance for external walls.
- Free survey in SA12 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Briton Ferry
Postcode, service and a phone number is all we need.
What the job covers
- Heavier than EPS, so more fixings and careful handling
- Used on blocks of flats and buildings with storeys above 11m
- Vapour-open, so moisture in solid walls can dry outwards
- Finished in mineral or silicone render, or brick slip

What we look for in Briton Ferry
Surveys in Briton Ferry also cover the surrounding SA12 district and towns such as Neath and Port Talbot. Briton Ferry sits around 5 miles from Swansea. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Older solid-walled homes in Briton Ferry can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Postcode district
- SA12
- County or area
- West Glamorgan
- Nation
- Wales
- Nearby
- Neath, Port Talbot, Swansea, Maesteg
Planning and building control in Wales
For homes in Briton Ferry, the local planning authority decides any borderline cases; changing a brick house to render, or work on flats, usually needs an application in Wales.
In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.
Wales applies its own external wall fire rules, updated in 2025; on taller residential buildings we specify non-combustible mineral wool systems.
What about noise?
Dense mineral wool adds mass and absorbs sound, so homes beside main roads or railways often notice a quieter interior, particularly where windows are also upgraded. The improvement depends on the whole wall and windows, so we don't quote decibel figures without testing.
Mineral wool external wall insulation prices in Briton Ferry
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Mineral wool EWI in Briton Ferry: questions
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Do you cover Briton Ferry?
Yes — we survey and quote mineral wool external wall insulation in Briton Ferry (SA12) and nearby Neath, Port Talbot and Swansea, with a fixed written price before any work starts.