Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Non-traditional houses · Scotland

Non-traditional and concrete house insulation in Dundee and Angus

We provide non-traditional house insulation across Dundee and Angus, including Dundee, Arbroath and Forfar, with a free survey and fixed written price. Where a home in Dundee and Angus is system-built, the first job is confirming the construction type.

  • Free survey and fixed written price
  • Guide price from £120 per m² + scaffold, 0% VAT
  • Planning and building control checked for Scotland

Free survey in Dundee and Angus

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • The survey identifies the construction type before anything is specified
  • Steel-framed BISF houses need care around the upper-storey cladding
  • Fixing design depends on the panel or frame behind the wall
  • Most system-built homes have thin, cold walls and no fillable cavity
  • EWI improves comfort and can renew a tired concrete exterior
A pair of post-war concrete semi-detached houses newly rendered in white and grey beside neighbours still showing concrete panels

Homes and walls in Dundee and Angus

Tayside has stone tenements and terraces in the towns, harled cottages and post-war estates.

Exposure to wind-driven rain varies across Dundee and Angus: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where one half of a pair in Dundee and Angus is insulated and the other isn't, we detail the boundary so the neighbour can join later.

Nation
Scotland
Region
Tayside
Towns covered
Dundee, Arbroath, Forfar, Montrose
Guide price
From £120 per m² + scaffold · 0% VAT

Permissions in Scotland

In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.

Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.

Does EWI fix mortgage problems with PRC houses?

Not on its own. Some precast reinforced concrete (PRC) house types were designated defective, and many lenders want a certified structural repair before they will lend. Insulation and render over the outside is not that repair. Other types, such as Wimpey no-fines, are generally treated differently. If mortgageability matters, speak to your lender or a surveyor before booking any work.

Non-traditional and concrete house insulation prices in Dundee and Angus

Non-traditional and concrete house insulation guide prices
ItemGuide priceNotes
EWI on concrete or steel-framed walls£120–£180 per m²0% VATIncludes extra preparation
Semi-detached, full house£11,400–£21,2000% VAT80–100 m² of wall, including scaffold
Concrete repairs found at surveyPriced separatelyOnly where needed

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Non-traditional houses in Dundee and Angus: questions

Can you insulate a Wimpey no-fines house?

Yes. No-fines houses have solid poured-concrete walls with no cavity, so EWI is the usual route. The survey checks the concrete condition first.

Can you put EWI on a BISF house?

Yes, with care. The steel frame and upper-storey cladding need a system and fixing method designed for that construction, and the condition of the frame should be understood first.

What if my neighbour isn't insulating?

We finish the system neatly at the boundary with a closing detail so the neighbouring house isn't affected and can be joined later.

Do you cover all of Dundee and Angus?

Yes. We survey and quote non-traditional house insulation across Dundee and Angus, including Dundee, Arbroath, Forfar, Montrose.

Do I need planning permission in Scotland?

In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.

Non-traditional houses in Dundee and Angus

Start with a guide price, then fix it with a free survey in Dundee and Angus.

Call freeGet a quote