Non-traditional houses · Kent
Non-traditional and concrete house insulation in Rochester
If you're planning non-traditional house insulation in Rochester, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Where a home in Rochester is system-built, the first job is confirming the construction type.
- Free survey in ME1 and nearby
- Guide price from £120 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Rochester
Postcode, service and a phone number is all we need.
What's included
- The survey identifies the construction type before anything is specified
- EWI is not a structural repair for PRC houses designated defective
- Steel-framed BISF houses need care around the upper-storey cladding
- Fixing design depends on the panel or frame behind the wall
Homes and walls in Rochester
We also cover Chatham and Strood, close to Rochester. Rochester is about 8 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Where one half of a pair in Rochester is insulated and the other isn't, we detail the boundary so the neighbour can join later.
- Postcode district
- ME1
- County or area
- Kent
- Nation
- England
- Nearby
- Chatham, Strood, Gillingham, Gravesend
Permissions in England
Planning in Rochester follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What does the work involve?
After checking the wall condition, any spalling concrete or corroded steel is reported before boards go on. Fixings are chosen for the substrate — concrete, steel-framed panels or mixed constructions — and the system is detailed around eaves, cills and the junction with neighbouring properties, which may not be insulated.
Non-traditional and concrete house insulation prices in Rochester
| Item | Guide price | Notes |
|---|---|---|
| EWI on concrete or steel-framed walls | £120–£180 per m²0% VAT | Includes extra preparation |
| Semi-detached, full house | £11,400–£21,2000% VAT | 80–100 m² of wall, including scaffold |
| Concrete repairs found at survey | Priced separately | Only where needed |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Non-traditional houses in Rochester: questions
Can you insulate a Wimpey no-fines house?
Yes. No-fines houses have solid poured-concrete walls with no cavity, so EWI is the usual route. The survey checks the concrete condition first.
Will EWI make my house mortgageable?
It can make a house more attractive and better insulated, but it does not replace a certified structural repair where a lender requires one. Ask your lender before relying on it.
What if my neighbour isn't insulating?
We finish the system neatly at the boundary with a closing detail so the neighbouring house isn't affected and can be joined later.
Do you cover Rochester?
Yes — we survey and quote non-traditional house insulation in Rochester (ME1) and nearby Chatham, Strood and Gillingham, with a fixed written price before any work starts.