Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Non-traditional houses · England

Non-traditional and concrete house insulation in Wiltshire

Planning non-traditional house insulation anywhere in Wiltshire? We cover towns including Swindon and Salisbury, and check planning and building control for each address. Where a home in Wiltshire is system-built, the first job is confirming the construction type.

  • Free survey and fixed written price
  • Guide price from £120 per m² + scaffold, 0% VAT
  • Planning and building control checked for England

Free survey in Wiltshire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • EWI is not a structural repair for PRC houses designated defective
  • The survey identifies the construction type before anything is specified
  • Most system-built homes have thin, cold walls and no fillable cavity
  • EWI improves comfort and can renew a tired concrete exterior
  • Steel-framed BISF houses need care around the upper-storey cladding
A pair of post-war concrete semi-detached houses newly rendered in white and grey beside neighbours still showing concrete panels

Local considerations in Wiltshire

The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Wiltshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where one half of a pair in Wiltshire is insulated and the other isn't, we detail the boundary so the neighbour can join later.

Nation
England
Region
South West
Towns covered
Swindon, Salisbury, Trowbridge, Chippenham
Guide price
From £120 per m² + scaffold · 0% VAT

Approvals in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

What does the work involve?

After checking the wall condition, any spalling concrete or corroded steel is reported before boards go on. Fixings are chosen for the substrate — concrete, steel-framed panels or mixed constructions — and the system is detailed around eaves, cills and the junction with neighbouring properties, which may not be insulated.

Non-traditional and concrete house insulation prices in Wiltshire

Non-traditional and concrete house insulation guide prices
ItemGuide priceNotes
EWI on concrete or steel-framed walls£120–£180 per m²0% VATIncludes extra preparation
Semi-detached, full house£11,400–£21,2000% VAT80–100 m² of wall, including scaffold
Concrete repairs found at surveyPriced separatelyOnly where needed

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Non-traditional houses in Wiltshire: questions

What if my neighbour isn't insulating?

We finish the system neatly at the boundary with a closing detail so the neighbouring house isn't affected and can be joined later.

Can you insulate a Wimpey no-fines house?

Yes. No-fines houses have solid poured-concrete walls with no cavity, so EWI is the usual route. The survey checks the concrete condition first.

Will EWI make my house mortgageable?

It can make a house more attractive and better insulated, but it does not replace a certified structural repair where a lender requires one. Ask your lender before relying on it.

Do you cover all of Wiltshire?

Yes. We survey and quote non-traditional house insulation across Wiltshire, including Swindon, Salisbury, Trowbridge, Chippenham.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Non-traditional houses in Wiltshire

Get a free survey and fixed written price for non-traditional house insulation in Wiltshire.

Call freeGet a quote