Silicone render · Cornwall
Silicone render in Bodmin
Quotes for silicone render in Bodmin list the system, the detailing and the VAT position in writing, so you know exactly what's included. If you're re-rendering in Bodmin, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in PL31 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Bodmin
Postcode, service and a phone number is all we need.
What's included
- Fine, even grain from about 1–2mm
- Can also go straight onto prepared masonry
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
Local considerations in Bodmin
Surveys in Bodmin also cover the surrounding PL31 district and towns such as St Austell and Newquay. Bodmin is about 28 miles from Redruth. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Parts of Cornwall fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Silicone suits most rendering jobs in Bodmin, either on its own or over insulation.
- Postcode district
- PL31
- County or area
- Cornwall
- Nation
- England
- Nearby
- St Austell, Newquay, Truro, Plymouth
Approvals in England
Planning in Bodmin follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Bodmin
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Bodmin: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Bodmin?
Yes — we survey and quote silicone render in Bodmin (PL31) and nearby St Austell, Newquay and Truro, with a fixed written price before any work starts.