Silicone render · Northern Ireland
Silicone render in County Fermanagh
Quotes for silicone render in County Fermanagh set out the system, detailing, access and VAT position in writing. If you're re-rendering in County Fermanagh, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for Northern Ireland
Free survey in County Fermanagh
Tell us the postcode and what you need.
Included as standard
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
- Used as the finish on most EWI systems
- Water-repellent surface that dries quickly after rain
- Fine, even grain from about 1–2mm
What we look for in County Fermanagh
Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Parts of County Fermanagh fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
On tree-shaded or north-facing walls in County Fermanagh, silicone's water repellence helps it stay cleaner for longer.
- Nation
- Northern Ireland
- Region
- Northern Ireland
- Towns covered
- Enniskillen, Lisnaskea, Irvinestown
- Guide price
- From £66 per m² + scaffold · inc VAT
Northern Ireland: planning and regulations
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. Changing the external appearance of a house may need permission, and conservation areas, flats, commercial buildings and listed buildings need planning permission or listed building consent. Check with your council's planning office.
Insulating external walls is building work under the Building Regulations (Northern Ireland) 2012, handled by council building control, with Technical Booklet F1 covering conservation of fuel and power in dwellings.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in County Fermanagh
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in County Fermanagh: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover all of County Fermanagh?
Yes. We survey and quote silicone render across County Fermanagh, including Enniskillen, Lisnaskea, Irvinestown.
Do I need planning permission in Northern Ireland?
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. We check your address before quoting.