Silicone render · Dumfries and Galloway
Silicone render in Stranraer
Need silicone render in Stranraer? Tell us about the property and we'll arrange a free survey and a written quote. If you're re-rendering in Stranraer, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in DG9
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Stranraer
Postcode, service and a phone number is all we need.
Included as standard
- Water-repellent surface that dries quickly after rain
- Vapour-open, so walls can still breathe
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
Local considerations in Stranraer
We cover Stranraer and the wider Dumfries and Galloway; island and remote addresses are surveyed by arrangement. South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Dumfries and Galloway fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
On tree-shaded or north-facing walls in Stranraer, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- DG9
- County or area
- Dumfries and Galloway
- Nation
- Scotland
Scotland: planning and regulations
Scottish householder rules mean many Stranraer jobs that change the outside of a house need a planning application; we confirm the position before quoting.
Where a building warrant is needed for Stranraer work, it's obtained before installation starts, and the quote says who arranges it.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Stranraer
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Stranraer: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Stranraer?
Yes — we survey and quote silicone render in Stranraer (DG9); island and remote addresses are surveyed by arrangement, with a fixed written price before any work starts.