Silicone render · Dundee and Angus
Silicone render in Forfar
Silicone render in Forfar: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. If you're re-rendering in Forfar, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in DD8 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Forfar
Postcode, service and a phone number is all we need.
What's included
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
Forfar: walls, weather and approvals
We also cover Dundee and Arbroath, close to Forfar. Forfar is about 12 miles from Dundee. Tayside has stone tenements and terraces in the towns, harled cottages and post-war estates.
Exposure to wind-driven rain varies across Dundee and Angus: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Forfar, either on its own or over insulation.
- Postcode district
- DD8
- County or area
- Dundee and Angus
- Nation
- Scotland
- Nearby
- Dundee, Arbroath, Montrose, Blairgowrie
Planning and building control in Scotland
For Forfar properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Scotland's building standards cover changes to external wall construction; we check whether your job in Forfar needs a warrant.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Forfar
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Forfar: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Forfar?
Yes — we survey and quote silicone render in Forfar (DD8) and nearby Dundee, Arbroath and Montrose, with a fixed written price before any work starts.