Silicone render · Essex
Silicone render in Brentwood
If you're planning silicone render in Brentwood, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On tree-shaded or north-facing walls in Brentwood, silicone's water repellence helps it stay cleaner for longer.
- Free survey in CM14 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Brentwood
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
What we look for in Brentwood
We also cover Billericay and Hornchurch, close to Brentwood. Brentwood sits around 18 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Brentwood, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- CM14
- County or area
- Essex
- Nation
- England
- Nearby
- Billericay, Hornchurch, Romford, Basildon
Planning and building control in England
Planning in Brentwood follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Brentwood
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Brentwood: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Brentwood?
Yes — we survey and quote silicone render in Brentwood (CM14) and nearby Billericay, Hornchurch and Romford, with a fixed written price before any work starts.