Silicone render · Greater London
Silicone render in Morden
Need silicone render in Morden? Tell us about the property and we'll arrange a free survey and a written quote. If you're re-rendering in Morden, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in SM4 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Morden
Postcode, service and a phone number is all we need.
What you get
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Fine, even grain from about 1–2mm
What we look for in Morden
We cover Morden and nearby Mitcham, Wimbledon and Carshalton. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Morden, either on its own or over insulation.
- Postcode district
- SM4
- County or area
- Greater London
- Nation
- England
- Nearby
- Mitcham, Wimbledon, Carshalton, New Malden
Approvals in England
For a house in Morden, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Morden
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Morden: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Morden?
Yes — we survey and quote silicone render in Morden (SM4) and nearby Mitcham, Wimbledon and Carshalton, with a fixed written price before any work starts.