Silicone render · Greater Manchester
Silicone render in Hyde
Silicone render in Hyde: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. On tree-shaded or north-facing walls in Hyde, silicone's water repellence helps it stay cleaner for longer.
- Free survey in SK14 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Hyde
Postcode, service and a phone number is all we need.
What the job covers
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
What we look for in Hyde
We also cover Denton and Stalybridge, close to Hyde. It's roughly 7 miles from Hyde to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Hyde, either on its own or over insulation.
- Postcode district
- SK14
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Denton, Stalybridge, Ashton-under-Lyne, Droylsden
England: planning and regulations
Planning in Hyde follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Hyde
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Hyde: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Hyde?
Yes — we survey and quote silicone render in Hyde (SK14) and nearby Denton, Stalybridge and Ashton-under-Lyne, with a fixed written price before any work starts.