Silicone render · Wales
Silicone render in Gwent
Silicone render across Gwent: measured survey, clear specification and a fixed written price before any work starts. If you're re-rendering in Gwent, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for Wales
Free survey in Gwent
Tell us the postcode and what you need.
Included as standard
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Can also go straight onto prepared masonry
Homes and walls in Gwent
South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Exposure to wind-driven rain varies across Gwent: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're re-rendering in Gwent, we'll show you what adding insulation under the silicone would cost at the same time.
- Nation
- Wales
- Region
- South Wales
- Towns covered
- Newport (Gwent), Cwmbran, Pontypool, Ebbw Vale, Caerphilly, Risca, Abergavenny, Monmouth
- Guide price
- From £66 per m² + scaffold · inc VAT
Planning and building control in Wales
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. Your local planning authority has the final word.
The Building Regulations as they apply in Wales treat insulating or re-rendering more than half of a wall's area, or more than a quarter of the building's whole envelope, as renovating a thermal element, with Approved Document L (Wales) setting the target. Building control is involved before work starts.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Gwent
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Gwent: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover all of Gwent?
Yes. We survey and quote silicone render across Gwent, including Newport (Gwent), Cwmbran, Pontypool, Ebbw Vale, Caerphilly.
Do I need planning permission in Wales?
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. We check your address before quoting.