Silicone render · Hampshire
Silicone render in Bordon
Need silicone render in Bordon? Tell us about the property and we'll arrange a free survey and a written quote. Silicone suits most rendering jobs in Bordon, either on its own or over insulation.
- Free survey in GU35 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Bordon
Postcode, service and a phone number is all we need.
What the job covers
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
Local considerations in Bordon
We also cover Farnham and Aldershot, close to Bordon. Bordon is about 28 miles from Southampton. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're re-rendering in Bordon, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- GU35
- County or area
- Hampshire
- Nation
- England
- Nearby
- Farnham, Aldershot, Fleet, Godalming
Planning and building control in England
Planning in Bordon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Bordon
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Bordon: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Bordon?
Yes — we survey and quote silicone render in Bordon (GU35) and nearby Farnham, Aldershot and Fleet, with a fixed written price before any work starts.