Silicone render · Lanarkshire
Silicone render in Motherwell
Need silicone render in Motherwell? Tell us about the property and we'll arrange a free survey and a written quote. If you're re-rendering in Motherwell, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in ML1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Motherwell
Postcode, service and a phone number is all we need.
What the job covers
- Used as the finish on most EWI systems
- Water-repellent surface that dries quickly after rain
- Vapour-open, so walls can still breathe
- Through-coloured — no painting needed
Motherwell: walls, weather and approvals
We cover Motherwell and nearby Bellshill, Hamilton and Wishaw. Motherwell sits around 7 miles from East Kilbride. West Central Scotland has sandstone tenements, interwar and post-war council housing including no-fines and other system-built types, and many harled (roughcast) houses.
Exposure to wind-driven rain varies across Lanarkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Motherwell, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- ML1
- County or area
- Lanarkshire
- Nation
- Scotland
- Nearby
- Bellshill, Hamilton, Wishaw, Coatbridge
Approvals in Scotland
For Motherwell properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Scotland's building standards cover changes to external wall construction; we check whether your job in Motherwell needs a warrant.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Motherwell
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Motherwell: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Motherwell?
Yes — we survey and quote silicone render in Motherwell (ML1) and nearby Bellshill, Hamilton and Wishaw, with a fixed written price before any work starts.