Silicone render · Lancashire
Silicone render in Preston
Homeowners and landlords in Preston can get a free survey and a fixed written quote for silicone render, covering PR1 and the surrounding area. Silicone suits most rendering jobs in Preston, either on its own or over insulation.
- Free survey in PR1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Preston
Postcode, service and a phone number is all we need.
What you get
- Can also go straight onto prepared masonry
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
What we look for in Preston
Surveys in Preston also cover the surrounding PR1 district and towns such as Leyland and Chorley. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Parts of Lancashire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
If you're re-rendering in Preston, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- PR1
- County or area
- Lancashire
- Nation
- England
- Nearby
- Leyland, Chorley, Blackburn, Darwen
England: planning and regulations
Planning in Preston follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Preston
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Preston: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Preston?
Yes — we survey and quote silicone render in Preston (PR1) and nearby Leyland, Chorley and Blackburn, with a fixed written price before any work starts.