Silicone render · Merseyside
Silicone render in Prescot
Silicone render in Prescot: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Silicone suits most rendering jobs in Prescot, either on its own or over insulation.
- Free survey in L34 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Prescot
Postcode, service and a phone number is all we need.
What's included
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
Before we quote in Prescot
As well as Prescot itself, we quote in Huyton, St Helens and Kirkby. Prescot sits around 7 miles from Liverpool. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Merseyside: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Prescot, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- L34
- County or area
- Merseyside
- Nation
- England
- Nearby
- Huyton, St Helens, Kirkby, Widnes
Approvals in England
Before quoting in Prescot, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Prescot
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Prescot: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Prescot?
Yes — we survey and quote silicone render in Prescot (L34) and nearby Huyton, St Helens and Kirkby, with a fixed written price before any work starts.