Silicone render · Norfolk
Silicone render in King's Lynn
If you're planning silicone render in King's Lynn, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Silicone suits most rendering jobs in King's Lynn, either on its own or over insulation.
- Free survey in PE30 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in King's Lynn
Postcode, service and a phone number is all we need.
What you get
- Through-coloured — no painting needed
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
Homes and walls in King's Lynn
We also cover Wisbech and March, close to King's Lynn. King's Lynn is about 39 miles from Norwich. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Norfolk sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in King's Lynn, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- PE30
- County or area
- Norfolk
- Nation
- England
- Nearby
- Wisbech, March, Spalding, Dereham
Permissions in England
Before quoting in King's Lynn, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in King's Lynn
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in King's Lynn: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover King's Lynn?
Yes — we survey and quote silicone render in King's Lynn (PE30) and nearby Wisbech, March and Spalding, with a fixed written price before any work starts.