Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Silicone render · England

Silicone render in Northamptonshire

Planning silicone render anywhere in Northamptonshire? We cover towns including Northampton and Kettering, and check planning and building control for each address. If you're re-rendering in Northamptonshire, we'll show you what adding insulation under the silicone would cost at the same time.

  • Free survey and fixed written price
  • Guide price from £66 per m² + scaffold, inc VAT
  • Planning and building control checked for England

Free survey in Northamptonshire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Can also go straight onto prepared masonry
  • Used as the finish on most EWI systems
  • Fine, even grain from about 1–2mm
  • Vapour-open, so walls can still breathe
  • Water-repellent surface that dries quickly after rain
A gloved hand finishing off-white textured silicone render with a steel trowel

Northamptonshire: walls, weather and approvals

Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.

Much of Northamptonshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Silicone suits most rendering jobs in Northamptonshire, either on its own or over insulation.

Nation
England
Region
East Midlands
Towns covered
Northampton, Kettering, Corby, Wellingborough, Rushden, Daventry
Guide price
From £66 per m² + scaffold · inc VAT

Approvals in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

Is silicone render maintenance-free?

Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.

Silicone render prices in Northamptonshire

Silicone render guide prices
ItemGuide priceNotes
Silicone render on masonry (with base coat + mesh)£66–£102 per m²inc VATExcluding scaffold
Front and side of a semi (≈60 m²)£3,960–£6,120inc VATPlus scaffold
As the finish on EWIIncluded in EWI rates

Confirmed by a fixed written quote after survey. Prices include VAT at 20%.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Silicone render in Northamptonshire: questions

Can silicone render go over old render?

If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.

Does silicone render crack?

The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.

How long does silicone render take to dry?

It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.

Do you cover all of Northamptonshire?

Yes. We survey and quote silicone render across Northamptonshire, including Northampton, Kettering, Corby, Wellingborough, Rushden.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Silicone render in Northamptonshire

Send your postcode and we'll arrange a survey in Northamptonshire.

Call freeGet a quote