Silicone render · Orkney, Shetland and the Western Isles
Silicone render in Stornoway
Homeowners and landlords in Stornoway can get a free survey and a fixed written quote for silicone render, covering HS1 and the surrounding area. If you're re-rendering in Stornoway, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in HS1
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Stornoway
Postcode, service and a phone number is all we need.
What you get
- Vapour-open, so walls can still breathe
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Water-repellent surface that dries quickly after rain
Stornoway: walls, weather and approvals
Surveys in Stornoway (HS1) are arranged around travel to the wider Orkney, Shetland and the Western Isles. The Highlands and Islands have many exposed stone and harled homes, timber-framed houses and scattered rural properties.
Parts of Orkney, Shetland and the Western Isles fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Silicone suits most rendering jobs in Stornoway, either on its own or over insulation.
- Postcode district
- HS1
- County or area
- Orkney, Shetland and the Western Isles
- Nation
- Scotland
Approvals in Scotland
In Scotland, permitted development for external wall changes is narrower, so in Stornoway we check with the council's planning team where the appearance changes, and always for flats, tenements and conservation areas.
Scotland's building standards cover changes to external wall construction; we check whether your job in Stornoway needs a warrant.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Stornoway
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Stornoway: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Stornoway?
Yes — we survey and quote silicone render in Stornoway (HS1); island and remote addresses are surveyed by arrangement, with a fixed written price before any work starts.