Silicone render · Suffolk
Silicone render in Ipswich
Silicone render in Ipswich: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. If you're re-rendering in Ipswich, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in IP1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Ipswich
Postcode, service and a phone number is all we need.
Part of every quote
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
- Used as the finish on most EWI systems
Ipswich: walls, weather and approvals
We cover Ipswich and nearby Harwich, Felixstowe and Stowmarket. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Suffolk sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Ipswich, either on its own or over insulation.
- Postcode district
- IP1
- County or area
- Suffolk
- Nation
- England
- Nearby
- Harwich, Felixstowe, Stowmarket, Colchester
Planning and building control in England
Planning in Ipswich follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Ipswich
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Ipswich: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Ipswich?
Yes — we survey and quote silicone render in Ipswich (IP1) and nearby Harwich, Felixstowe and Stowmarket, with a fixed written price before any work starts.