Silicone render · Surrey
Silicone render in Camberley
If you're planning silicone render in Camberley, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Silicone suits most rendering jobs in Camberley, either on its own or over insulation.
- Free survey in GU15 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Camberley
Postcode, service and a phone number is all we need.
Part of every quote
- Used as the finish on most EWI systems
- Can also go straight onto prepared masonry
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
Before we quote in Camberley
We also cover Sandhurst and Farnborough, close to Camberley. Camberley sits around 8 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On tree-shaded or north-facing walls in Camberley, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- GU15
- County or area
- Surrey
- Nation
- England
- Nearby
- Sandhurst, Farnborough, Crowthorne, Yateley
England: planning and regulations
Before quoting in Camberley, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Camberley
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Camberley: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Camberley?
Yes — we survey and quote silicone render in Camberley (GU15) and nearby Sandhurst, Farnborough and Crowthorne, with a fixed written price before any work starts.