Silicone render · Surrey
Silicone render in Caterham
Homeowners and landlords in Caterham can get a free survey and a fixed written quote for silicone render, covering CR3 and the surrounding area. On tree-shaded or north-facing walls in Caterham, silicone's water repellence helps it stay cleaner for longer.
- Free survey in CR3 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Caterham
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so walls can still breathe
- Can also go straight onto prepared masonry
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
Caterham: walls, weather and approvals
Surveys in Caterham also cover the surrounding CR3 district and towns such as Coulsdon and Purley. Caterham sits around 21 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Caterham, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- CR3
- County or area
- Surrey
- Nation
- England
- Nearby
- Coulsdon, Purley, Redhill, South Croydon
England: planning and regulations
For a house in Caterham, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Caterham
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Caterham: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Caterham?
Yes — we survey and quote silicone render in Caterham (CR3) and nearby Coulsdon, Purley and Redhill, with a fixed written price before any work starts.