Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Silicone render · England

Silicone render in Tyne and Wear

Get guide prices online, then a free survey and fixed quote for silicone render in Tyne and Wear, including Sunderland and South Shields. Silicone suits most rendering jobs in Tyne and Wear, either on its own or over insulation.

  • Free survey and fixed written price
  • Guide price from £66 per m² + scaffold, inc VAT
  • Planning and building control checked for England

Free survey in Tyne and Wear

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Used as the finish on most EWI systems
  • Vapour-open, so walls can still breathe
  • Water-repellent surface that dries quickly after rain
  • Through-coloured — no painting needed
  • Fine, even grain from about 1–2mm
A gloved hand finishing off-white textured silicone render with a steel trowel

What we look for in Tyne and Wear

The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Silicone suits most rendering jobs in Tyne and Wear, either on its own or over insulation.

Nation
England
Region
North East
Towns covered
Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Wallsend, Newburn, North Shields…
Guide price
From £66 per m² + scaffold · inc VAT

England: planning and regulations

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

Silicone or monocouche?

Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.

Silicone render prices in Tyne and Wear

Silicone render guide prices
ItemGuide priceNotes
Silicone render on masonry (with base coat + mesh)£66–£102 per m²inc VATExcluding scaffold
Front and side of a semi (≈60 m²)£3,960–£6,120inc VATPlus scaffold
As the finish on EWIIncluded in EWI rates

Confirmed by a fixed written quote after survey. Prices include VAT at 20%.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Silicone render in Tyne and Wear: questions

Can silicone render go over old render?

If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.

Does silicone render crack?

The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.

How long does silicone render take to dry?

It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.

Do you cover all of Tyne and Wear?

Yes. We survey and quote silicone render across Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Silicone render in Tyne and Wear

Start with a guide price, then fix it with a free survey in Tyne and Wear.

Call freeGet a quote