Silicone render · Warwickshire
Silicone render in Rugby
Quotes for silicone render in Rugby list the system, the detailing and the VAT position in writing, so you know exactly what's included. If you're re-rendering in Rugby, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in CV21 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Rugby
Postcode, service and a phone number is all we need.
What you get
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
Homes and walls in Rugby
We also cover Daventry and Coventry, close to Rugby. It's roughly 12 miles from Rugby to Leamington Spa, the largest town in Warwickshire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Warwickshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Rugby, either on its own or over insulation.
- Postcode district
- CV21
- County or area
- Warwickshire
- Nation
- England
- Nearby
- Daventry, Coventry, Bedworth, Leamington Spa
Approvals in England
For a house in Rugby, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Rugby
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Rugby: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Rugby?
Yes — we survey and quote silicone render in Rugby (CV21) and nearby Daventry, Coventry and Bedworth, with a fixed written price before any work starts.