Silicone render · West Midlands
Silicone render in Wednesfield
Need silicone render in Wednesfield? Tell us about the property and we'll arrange a free survey and a written quote. On tree-shaded or north-facing walls in Wednesfield, silicone's water repellence helps it stay cleaner for longer.
- Free survey in WV11 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Wednesfield
Postcode, service and a phone number is all we need.
Part of every quote
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
Local considerations in Wednesfield
As well as Wednesfield itself, we quote in Willenhall, Wolverhampton and Bloxwich. It's roughly 11 miles from Wednesfield to Birmingham, the largest town in West Midlands. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of West Midlands sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Wednesfield, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- WV11
- County or area
- West Midlands
- Nation
- England
- Nearby
- Willenhall, Wolverhampton, Bloxwich, Wednesbury
England: planning and regulations
Planning in Wednesfield follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Wednesfield
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Wednesfield: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Wednesfield?
Yes — we survey and quote silicone render in Wednesfield (WV11) and nearby Willenhall, Wolverhampton and Bloxwich, with a fixed written price before any work starts.