Silicone render · West Sussex
Silicone render in Burgess Hill
If you're planning silicone render in Burgess Hill, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On tree-shaded or north-facing walls in Burgess Hill, silicone's water repellence helps it stay cleaner for longer.
- Free survey in RH15 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Burgess Hill
Postcode, service and a phone number is all we need.
Part of every quote
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
What we look for in Burgess Hill
We also cover Haywards Heath and Portslade, close to Burgess Hill. Burgess Hill sits around 11 miles from Crawley. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Exposure to wind-driven rain varies across West Sussex: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're re-rendering in Burgess Hill, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- RH15
- County or area
- West Sussex
- Nation
- England
- Nearby
- Haywards Heath, Portslade, Hove, Brighton
Approvals in England
Before quoting in Burgess Hill, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Burgess Hill
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Burgess Hill: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Burgess Hill?
Yes — we survey and quote silicone render in Burgess Hill (RH15) and nearby Haywards Heath, Portslade and Hove, with a fixed written price before any work starts.