Silicone render · West Yorkshire
Silicone render in Wakefield
From Wakefield to Ossett, we price silicone render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. If you're re-rendering in Wakefield, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in WF1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Wakefield
Postcode, service and a phone number is all we need.
What's included
- Can also go straight onto prepared masonry
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
What we look for in Wakefield
Surveys in Wakefield also cover the surrounding WF1 district and towns such as Ossett and Dewsbury. It's roughly 8 miles from Wakefield to Leeds, the largest town in West Yorkshire. Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across West Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Wakefield, either on its own or over insulation.
- Postcode district
- WF1
- County or area
- West Yorkshire
- Nation
- England
- Nearby
- Ossett, Dewsbury, Morley, Batley
Permissions in England
Planning in Wakefield follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Wakefield
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Wakefield: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover Wakefield?
Yes — we survey and quote silicone render in Wakefield (WF1) and nearby Ossett, Dewsbury and Morley, with a fixed written price before any work starts.