Silicone render · West Yorkshire
Silicone render in Yeadon
If you're planning silicone render in Yeadon, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Silicone suits most rendering jobs in Yeadon, either on its own or over insulation.
- Free survey in LS19 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Yeadon
Postcode, service and a phone number is all we need.
Included as standard
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
What we look for in Yeadon
We also cover Guiseley and Shipley, close to Yeadon. It's roughly 7 miles from Yeadon to Leeds, the largest town in West Yorkshire. Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across West Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Yeadon, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- LS19
- County or area
- West Yorkshire
- Nation
- England
- Nearby
- Guiseley, Shipley, Pudsey, Bradford
Approvals in England
Planning in Yeadon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Yeadon
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Yeadon: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Yeadon?
Yes — we survey and quote silicone render in Yeadon (LS19) and nearby Guiseley, Shipley and Pudsey, with a fixed written price before any work starts.