Silicone render · Wiltshire
Silicone render in Swindon
Homeowners and landlords in Swindon can get a free survey and a fixed written quote for silicone render, covering SN1 and the surrounding area. On tree-shaded or north-facing walls in Swindon, silicone's water repellence helps it stay cleaner for longer.
- Free survey in SN1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Swindon
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so walls can still breathe
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
Homes and walls in Swindon
Surveys in Swindon also cover the surrounding SN1 district and towns such as Chippenham and Witney. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Wiltshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're re-rendering in Swindon, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- SN1
- County or area
- Wiltshire
- Nation
- England
- Nearby
- Chippenham, Witney, Stroud, Newbury
Approvals in England
Planning in Swindon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Swindon
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Swindon: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Swindon?
Yes — we survey and quote silicone render in Swindon (SN1) and nearby Chippenham, Witney and Stroud, with a fixed written price before any work starts.